How to Remove Scratches from Aluminum Laptop? Quick Guide

As companies look for new methods to improve their products, modern laptops have not only improved specs but also cutting-edge designs. The laptops are being covered in some unique yet elegant materials. And, in the midst of it all, if there’s one product that’s doing the job cheaply, it’s aluminum. However, computers with aluminum bodies have become more or less standard in recent years. As a result, these two problems arose: how to protect an aluminum laptop from getting scratches and how to remove scratches from an aluminum laptop (both minor and deep).

Yes, if an aluminum laptop has advantages such as superior aesthetics, lightness, and so on, it also has one huge disadvantage.

How to Remove Scratches from Aluminum Laptop?

There are a number of techniques to keep an aluminum laptop from getting scratches and to remove them if it does. To remove scratches from an aluminum laptop, you can use fluoride-free toothpaste, baking soda (paste), a silver pen, metal polish, or a scratch remover, among other things.

While some of these techniques may only work for tiny scratches, others would definitely work for those deep scratches. As a result, the result of each technique will vary depending on the severity of the abrasion.

Types of Scratches:

As previously said, there are primarily two types of scratches: little markings that are barely noticeable, or major thick and deep grooves.

#1. Minor and Hairline Scratches

So, once again, a little scratch is not a major wound, but rather a graze – a barely visible mark on the surface of your laptop (that does not pierce the body). While a single such scratch isn’t a major concern, if it multiplies, it might dull the shine and beauty of your laptop.

So, if these scratches are high in quantity, you must take care of them and clean them up if they aren’t for one or two. Because they’ll make your brand-new laptop appear soiled and old.

#2. Major Scratches

Major scratches, as opposed to minor blemishes, are clefts and cracks in your laptop created by a catastrophic accident.

To be honest, such scratches-cum-grooves are difficult to remove or fix. However, there are still ways to fill the grooves, slow their expansion, and reduce their visibility.

Methods to Remove or Minimize Scratches from Aluminum Laptop

Putting aside the severity of the situation, there are a variety of approaches to deal with the scratches on your laptop.

So, before I go into detail about which methods are better for tiny scratches and which are best for big scratches, let me first list all of them.

  • Using a scratch remover for your laptop
  • By using fluoride-free toothpaste
  • Using a baking soda paste
  • The use of Metal Polish
  • By applying Plastic Polish

Let’s look at how each of these ways works and which one is best for different scratch types.

Remove Minor Scratches from Aluminum Laptop

As a result, the first three techniques are usually restricted to surface-limited abrasions, such as scratches created by rash use or other markings and scars, and so on.

#1. Using A Scratch Remover to Remove (or Reduce) Scratches

A scratch remover, as the name implies, is the most obvious approach to get rid of those minor scratches on your laptop. An aluminium scratch remover will function similarly to a car scratch remover, diminishing or almost erasing scratches and rejuvenating the finish on your laptop.

So, first and foremost, go to a nearby computer store and purchase a high-quality laptop scratch remover.

Clean the scratched surface with a cloth to remove any dust residues. Simply spray a small amount of the scratch remover onto a soft, lint-free cloth and apply it to the affected area. Now, I will tell you how to remove scratches from a brushed aluminum laptop?

First, pass the solution over all of the marks thoroughly and move the cloth in a circular motion with light pressure. After a while, you’ll see that a lot of the light and shallow scratches have vanished

Make sure you’re using a soft microfiber cloth rather than a hard, unclean fabric, as this will exacerbate the scratches on the rub. Furthermore, avoid using a strong massage and instead attempt to be as soft as possible.

Point to be noted:

These scratch removers work best on colorless scratches, not colored ones like black scores. Furthermore, a  scratch remover will never completely erase the damage; instead, it will enhance the appearance of your laptop by restoring its finish.

#2. Using Fluoride-Free Toothpaste

As I previously stated, this procedure will only work for tiny scratches. It may sound strange or even comical, but toothpaste is a proven approach to reduce and remove numerous on-surface scratches.

You could use any fluoride-free toothpaste to get the job done. It can effectively decrease the look of the scratch, and in the event of a barely perceptible mark, it can even make you feel as if it’s been totally removed.

And the advantage here is that it is a fully free home cure, making it a very cost-effective option.

So, clean the desired surface with a moist towel first. Then, using a microfiber cloth or a small cotton pad, apply a small amount of toothpaste. Then, using the same circular motions and a mild press, begin rubbing the cloth/cotton on the scratched area.

You’ll eventually notice a difference in the scratches, or even feel as if some minor marks have vanished entirely.

#3. Using Baking Soda Paste

Another widely used home treatment for minor surface scratches on aluminum laptops and other products are to apply baking soda paste. It’s also one of the most cost-effective and efficient methods of getting the task done.

Because baking soda is a powder, you must first produce a paste with it by combining it with water (in a bowl). To be on the safe side, consume half the amount of the solute in water.

There’s a danger that if there’s too much water, it’ll leak through the casing, damaging the microscopic components inside. So, if you take two (2) spoons of soda, you should only take one (1) spoon of water, and so on.

A thick solution (paste) will be made from this ratio, and it will act similarly to a standard scratch remover. In any case, apply a small amount of the paste to a smooth and soft microfibre (or linen) cloth and gently rub the scratched area in circular motions.

When you’re finished, you’ll see that the amount of scratches has decreased. At the very least, your laptop’s appearance will undoubtedly improve. Then, using a moist cloth, wipe away any extra (dried) residue.

Other Remedies for Minor Scratches

Aside from all of these well-known approaches for avoiding minor body scratches, there are a few other lesser-known options. They include the use of magical erasers, silver pens (in the case of colourful marks), and laptop cleaner sprays.

Now, let’s move on to the more complex, money-sucking methods for dealing with those deep scratches and cracks on your aluminium laptop.

How can you get rid of deep scratches on an aluminium laptop?

Let me first clarify one point: as we all know, deep scratches run into the laptop’s body – these are generally breaks or fractures, so the removal is pretty difficult.  However, you might try filling them up to make them less noticeable.

So here’s how to get rid of, or at least minimize, deep scratches and severe grooves on your aluminum laptop.

#1. Applying Plastic Polish

Remember how I stated in the aluminum scratch remover part that a scratch remover couldn’t work on an on-surface dent that was a little too deep? This is where plastic polish comes in as a more effective solution.

Plastic polish is the greatest technique to decrease the visibility of, and even eliminate, deeper scratches that a scratch remover can’t handle. To apply the plastic polish on your aluminium laptop, you’ll need to clean it well – especially the scratched area.

So, first, produce a solution in a bowl by mixing some water with a little dishwashing soup. Then, using a delicate cloth, gently clean the scratched surface with that solution and dry it thoroughly with another piece.

Simply apply a small amount of polish to the same microfiber cloth, pass it over the scratches, and gently rub in a circular motion. You’ll see better results this time, with even the deeper surface dents fading out greatly (I hope you have a good plastic polish).

Finally, using a clean wet cloth, wipe away any remaining polish from the surface.

#2. Applying Metal Polish

Unfortunately, if nothing else worked and certain severe scratches, cracks, or grooves could not be removed or reduced with even plastic polish (laptop scratch remover), you’ll need to use a metal polish. It’s a tried and true method for “how to fix scratches on a laptop.”

Metal polish is a bit pricy, but it’s ideal for the job because it’s designed specifically for metals such as Bronze, Copper, Aluminum, Stainless Steel, Chrome, and Brass, among others. It’s ideal for removing deep scratches on aluminium computers like MacBook(s), as well as removing big cracks. So I’m not sure if I should call it MacBook Pro Scratch Remover.

Metal polish is available in paste form, and all you have to do is take a little clod from the container and apply it to the dented area. Drag it over all of the scratches to cover and fill them in.

Then just wait a few minutes for the paste to settle and perform its job properly. Remove the extra paste from the surface with a clean microfiber cloth once the item is thoroughly baked.

Make sure you obtain the best metal polish you can find, such as Rolite metal polish. Such a high-quality aluminum scratch remover will not only remove or lessen existing scratches but will also protect your laptop from new scratches for a long time.

Regardless, the metal polish will totally remove those deeper surface scratches.

However, if a crack remains apparent and bothersome, use a second layer for much better results. The crack will either fade away completely or be barely evident after the second coat. This remedy is certainly the answer for ‘how to remove scratches from hp laptop, dell laptop, MacBook, etc?

Final Thoughts:

So, while it’s natural for an aluminum laptop to acquire scratches over time, it’s also not a major issue to cope with these issues. While scratches can be readily avoided with a little extra care, minor surface scratches can be simply removed with a few simple home treatments.

The problem is how to remove deep scratches from an aluminium laptop, because dealing with them is a bit more (tiresome) effort. But, if you’ve read this essay, I’m confident that’s no longer an issue for you. If you like our article or have any queries regarding it, do mention them in the comment section!

Leave a Comment